Price: $839.77
(as of Sep 09, 2022 14:24:47 UTC – Details)
Specification:
Miner Case Size: 625 mm * 380 mm * 177 mm (24.61 in * 14.96 in * 6.97 in) Compared with surface mining machines, this type of mining equipment can save a lot of space
Product Weight: 18 kg
GPU Pitch: 65 mm (2.56 in)
Supported Graphics cards: supports up to 8 graphics cards (compatible with the length of the internal graphics card of 340 mm), compatible with RX570/RX580/P104/1060/1660/3060Ti, etc.
Operating System: Win10 system 64-bit
Processor: Integrated CPU
CPU Socket: LGA (1155)
Memory: DDR3 4G
Storage Hard Disk: 128g MSATA SDD
Heat Dissipation Design: standard 4 powerful fans (6000 rpm)
Interface Details:
Hard Disk Interface: 1 * SATA3.0
Hard Disk Interface: 1 * MSATA
The Interface of the Network Card: 1 * LAN
Graphics Card Interface: 8*PCIE_16X
Power Interface of Motherboard/Graphics Card: 24 * POWER_PE
Package Included:
1 * Motherboard CPU Group
1 * DDR3 4G Memory
1 * 128G MSATA SDD
1 * 2000W Miner Power Supply
8 * PIN Line (6 to 6+2PIN Power Supply)
4 * Cooling Fan
1 * Mining Machine Case
Please note:
1. The power supply configured in this mining machine is not a full-voltage power supply, and the voltage only supports 220V~240V. You need to connect a voltage greater than 220 V to work!
2. GPU is not included in the package, so you need to purchase and install your own GPU separately to work properly
3. The device supports up to 8 GPU operations
4. If using a 2000W rate power supply, When you run the GPU overclocking, it is easy to burn the motherboard and power supply and GPU. It is recommended to use the GPUs under the rated power of the power supply.
[8 GPU Slots]: There are 8 GPU expansion slots in the mining machine chassis, which can support high-performance computing with 8 graphics cards. Designed specifically for cryptocurrency mining-the card slot spacing is 65MM (2.56 inches), which accelerates air convection, improves heat dissipation, extends the life of the graphics card. With 8 GPUs working at the same time, the performance of the mining system will be greatly improved. Note: We do not recommend mixing different types of GPUs
[Mining Rig Case]: The casing of the mining machine is made of high-quality stainless steel, which is sturdy and durable, which can fully protect your GPU and electronic equipment from damage. (Chassis size: 29.53 in * 21.26 in * 11.81 in) The chassis is equipped with four 120MM (4.72 in) cooling fans, with a rotation speed of 6000 rpm
[Mining Machine Motherboard]: B75 platform mining machine system dedicated motherboard, rear 2 USB 2.0 ports, 2 USB 3.0 ports, 1 VGA port, support DDR3 SO-DIMM type memory slot. The motherboard is made of high-quality steel, sturdy and durable, reusable, with low power consumption, low heat generation, etc., effectively improving GPU performance
[Excellent Safety Design]: In addition to standard vents on the back of the chassis, vents are also designed on both sides of the chassis, it can be guaranteed to cooperate with the fan when the equipment is running, provide better the effect of heat dissipation for the motherboard,graphics card and power supply, extend the service life of the equipment. Every vent is polished and not sharp. You don’t need to worry about scratching your hands when you move it. It’s very safe.
[Note]: The power supply of this miner is an external power supply with a rated output power of 2000W and only supports 220V~240V voltage. You can freely choose to install inside or outside the mining machine
