Jasminer X4-1U 520mh/s miner. Unboxing and How to set up [Full Tutorial]

💡Tryout HIVEOS Entirely Free:

Hi everyone so we just received five miners today 
and all of them are from Sunlune Jasminer series   but we are cooperate with Jingle Mining and we 
are the largest distributor of miner in Europe   so let's do a mini unboxing.
X4-1U with 520 mh/s hashrate   to Ethash to ETC coin and 
power consumption of 240 watts.  What about dimension?
The dimension is:  the length is a 48 centimeters the width is 45 
centimeters and the highest is 5 centimeters.  It looks like IDC server but 
actually it's Asic Miner.  After opening the box as you can see we have a 
cable and a machine unfortunately the cable was   a different than we use in Europe but as always we 
have a spare but remember to have your own cable! What you need to connect the miner?
Of course internet cable   and the power cable that's all what you need.
So let's start to connect the miner.

The first   will be the power cable it's hard to insert this 
cable but it's worked then the internet cable. As you can see you can hear how it works   it's a low power because it's not 
configured but this is the second step.  Before mining we still need to create an account 
on the mining pool can be f2pool or which we   recommend here is a refilnik it's really easy 
to register i hope you can do it alone someone   can has mining pool like me so i just need to 
log in. At the top we have to change bitcoin   to Ethereum or you can click 
Ethereum classic what you prefer. After we have connected the Jasminer to my 
internet and the log it into the back page   now you can set up the configuration on this page.
How to find this page? You need to find your IP.   Enter the password and the login always it's 
[root root] and here is a panel of the miner   here is all information.
We have status, miner, network,   admin, log, upgrade, reboot and reset. 
We can upgrade new firmware for example   and overview we have all information 
okay let's focus on the configuration.

pexels photo 2892618

Okay if our miner is ready we 
can write address stratum and the   worker from pool and the second in the third place 
we can write same and we can click here update   then after loading click on the second tab 
– status and you can see uptime of hashrate   and after 30 minutes running we can 
find device hashrate on status page. Here we have a green light which is a good sign and after 30 minutes we have hash ate We will see which hash rate 
will be after around 24 hours   as you can see the hashrate has stabilizated 
and the machine is working above 500 mh/s.  Okay so now let's check how loud is the 
device.

It's around 67 decibel so it's   much quieter than a normal Asic. After it's 
fully warmed up, here's the power consumption.  We connect the rest of the 
miner and this is how they look.  We can put this miner in a rack so if we have 
insufficient space we can put other device.  Here is a mini video how the rack is looks like. do the fact that the miner is a flat we can 
put one on top of the other and as you know   other asic model can not be put on top of each 
other so i think it's a big plus for jasminer that's it for this video i hope 
you guys you like this video make   sure to subscribe if you are not 
already and that's all from me bye don't forget about our shop here is the link we 
are the best distributor of the miner in Europe

As found on YouTube

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *