Building a mining rig 2021

We’ll show you how to building a mining rig 2021 in this article, as well as some basic guidelines to follow while building one for the first time.

💡Tryout HIVEOS Entirely Free:

If you have no prior experience with mining, we strongly advise that you begin mining on your PC before building your first rig to gain a basic understanding of how mining works. In just a few seconds, you may try mining with NiceHash by clicking the button below!

Building a mining rig 2021

We shall discuss the following issues in this guide:

  • What is the definition of a mining rig?
  • To create a mining setup, how much computer knowledge do I need?
  • Where can I receive more assistance when developing a mining rig?
  • What components should a mining rig have?
  • What GPU should I use for a mining rig?
  • What USB PCI-e risers should you get for your mining rig?
  • What is the best CPU for a mining rig?
  • What motherboard should I choose for my mining rig?
  • What is the best power source for a mining rig?
  • What kind of RAM should a mining rig have?
  • What is the ideal frame for a mining rig?
  • What kind of hard disk should a mining rig have?

What is the definition of a mining rig?

A mining rig is a computer with additional graphics cards (or GPUs). Because there isn’t enough room to fit that many GPUs in a typical PC casing, a mining setup doesn’t have one. Overheating is a common problem with standard PC chassis, resulting in GPU thermal throttling.

We can save money by using many GPUs with a single motherboard, CPU, disk, and memory, allowing us to invest in more GPUs.

To create a mining setup, how much computer knowledge do I need?

There isn’t much. You will have no trouble building a mining rig if you have a basic understanding of how to build a computer. The construction of a mining rig is comparable to that of a PC gaming or office machine.

The only distinction is the number of GPUs. PCI-e USB risers are required to lift them above the motherboard.

What do I need to build a mining rig? We are going to list two below for starters first is for GPU mining, second will be CPU Mining we recommend this to start out

Mining Rig #1 Part List:
1: Asus Prime Z590-V Motherboard:
2: Intel Pentium G6400:
3: Corsair Vengeance 2x 8GB Ram Kit:
4: m.2 to PCIE Adapters:
5: Kingston 240GB SSD:
6: USB to SATA Adapter:
7: Mining Frames:
8: PCIE Risers:
9: PCIE Splitters:
10: EVGA 1300 P+ Platinum PSU:
Parallel Miner PSU Kit:…
11: GPUs Available on Amazon?
12: Power Button:

Mining Rig #2 CPU Mining Part List:
1 – MSI X470 Gaming Plus Max:
2 – Ryzen 3900x:
3 – G.Skill Flare X 16GB CL14:
4 – Sub to RABID MINING!:…
5 – Kingston 240GB SSD:
6 – USB to SATA Adapter:
7 – Mining Frames:
8 – PCIE Risers:
9 – PCIE Splitters:
10 – EVGA 1600 P2 Platinum PSU:
EVGA 1300 P+ Platinum PSU:
Parallel Miner PSU Kit:…
11 – GPUs Available on Amazon?
12 – Power Button:

What GPU should I use for a mining rig?

Because GPUs are the ones that generate earnings, they are the most crucial portion of the mining system.

When choosing a GPU, there are three important factors to consider:

  • How much does it set you back?
  • How much profit does it make per day or month?
  • How much power does it consume?

You should purchase the GPU with the highest return on investment (return on investment).

GPU purchase price / net daily profit is used to compute ROI. The ROI is 100 days assuming the GPU purchase price is $200 USD and daily income is $2 USD (with energy expenses already taken into account).

For a mining rig, we recommend the following GPUs:

???? Our Recommended GPUs – Ranked in order
[Check your local market apps for better deals!] – (Offer ups, letgo, Kijiji, Craigslist, etc.)
???? RTX 3070 | On Amazon |
???? RTX 3060 TI | On Amazon |
???? RX 6800 XT | On Amazon |
???? RTX 3080 | On Amazon |
???? GTX 1660 Super | On Amazon |
???? RX 5700 XT | On Amazon |
???? RX 5600 XT | On Amazon |
???? RX 5500 XT 8 GB | On Amazon |

What USB PCI-e risers should you get for your mining rig?

For a mining rig, PCI-e risers are essential. They enable the GPU to be raised away from the motherboard. This allows us to distribute it further away from the next GPU, allowing for greater airflow and cooling.

Mining PCI-e risers are often less expensive (up to ten times less expensive) than those used in PC gaming systems. This also implies that the riser may fail sooner than expected. We recommend purchasing two or three extra risers as a backup.

81 0QwMxL. AC SL1500

I have had good luck with these PCIE Risers from Amazon also PCIE Risers:

What is the best CPU for a mining rig?

When designing a mining rig, you may always save money by choosing less-than-ideal components. One of them is the CPU.

If you don’t intend to mine using a CPU, then any low-end CPU will suffice. The performance of the GPU is unaffected by the performance of the CPU.

If you want to mine using a CPU, you’ll need to invest in a high-performance CPU. When it comes to mining, AMD Ryzen CPUs are known to perform well when compared to Intel CPUs, which have much lower hashrates.

For a mining system, a good AMD Ryzen processor-based on price/performance would be:

???? Intel Pentium G6400 for mining

If you are going to CPU Mine also recommend the Ryzen 3900x

What motherboard should I get for my mining rig?

When it comes to selecting the correct motherboard, there are a few factors to consider:

Type of processor socket.
The number of GPUs you plan to use.
CPU sockets are used differently by Intel and AMD. LGA 1200 is Intel’s most recent socket, while AM4 is AMD’s most recent socket. Make sure you have the right motherboard for your processor.

Another consideration is the number of PCI-e x16 and PCI-e x1 connectors supported by the GPU.
PCI-e connectors are slots on the motherboard that allow you to plug in your graphics card. Normally, the GPU is connected to the motherboard through a PCI-e x16 connector (the long one). In mining setups, however, we typically employ PCI-e x1 USB risers, which may link many GPUs to a single motherboard.

You can also use PCI-e splitter cards to split one PCI-e x1 slot into four PCI-e x1 slots if you can’t find a low-cost motherboard with enough PCI-e slots.

Asus Prime Z590-V Motherboard for standard mining

MSI X470 Gaming Plus Max if you plan on CPU mining also

What is the best power source for a mining rig?

Another crucial piece of equipment that is reliant on the previously chosen components. It is largely determined by the number and type of GPUs chosen.

To begin, figure out how much electricity your entire system will consume.

You may achieve this by calculating the total power demand of your GPU(s) (TDP). Then multiply 100W by 1.2 for the rest of the system* (motherboard, CPU, RAM, and drive).

For example, a 1000W system will require at least a 1200W power supply unit. (1000 divided by 1.2 Equals 1200)

The number of PCI-e power cable connectors on the GPU must also be counted.
All GPUs should be powered by a PSU with enough PCI-e power connectors.

If you can’t find a PSU with enough PCI-e power connectors, consider buying two or even three for a single machine. With 24-pin ATX PSU splitters, you can easily connect them.

For GPU use EVGA 1300 P+ Platinum PSU
For GPU & CPU Mining – EVGA 1600 P2 Platinum PSU

What kind of RAM should a mining rig have?

For mining, RAM is the least expensive and least crucial component. Except if you’re going to mine with an AMD Ryzen CPU. We recommend that you read this post to understand more about CPU performance based on RAM speed.

If you’re mining with a low-end CPU or don’t plan to utilize it, any 8GB or even 4GB memory stick would suffice. Choose the cheapest option.

What is the ideal frame for a mining rig?

The frame you choose is determined by your unique demands and preferences. You may either build one yourself or purchase a pre-built (and hence more expensive) mining frame.

For 10 graphics cards, we recommend the DimasTech X-Hash mining equipment or something similar. This frame was utilized in the construction of this mining rig.

What kind of hard disk should a mining rig have?

Another item that is dependent on your particular preferences. Any SSD or HDD will suffice if you plan to utilize Windows 10. SSD 120GB disks are now reasonably priced. A 120GB SSD is recommended.

If you’re going to utilize a Linux-based operating system, you’ll need at least a 16GB USB flash drive (8GB or even 4GB works fine with NHOS).

It’s worth noting that HDD/SDD can also be used on Linux computers.
Kingston 240GB SSD:

Part 1 comes to a close.
This concludes part one. Now is the time to relax and enjoy the process of locating the proper components. If you have a problem, don’t be scared to seek assistance.

How to build a mining rig in 2021? – part 2

As an Amazon Associate I earn from qualifying purchases. *DISCLAIMER* When it comes to GPU Mining, remember Silicon Lottery! Results MAY vary from GPU to GPU so your Clocks/Undervolt/Voltage shown in my videos may not work for you because of GPU Brand/Memory/Manufacturing what have you. Temperatures and your Cooling methods will also play the part and have an affect. Test at your OWN RISK and do your OWN RESEARCH. Disclaimer – I am not an expert. This is not financial advice and do your own research. Everything said is from my point of view and for entertainment purposes.

Disclaimer – This is not financial advice – please do your own research. Everything is for entertainment purposes and from our personal experience.

We use Amazon affiliate links. That means if you order using the link we will get a small commission with no additional costs to you! Thank you for your support!

Leave a Reply

Your email address will not be published. Required fields are marked *