6 GPU Mining Rig Case ETH-HSW2 with Mining Motherboard and Cooling Fans 4 PCS, Mining Machine System for Mining ETH Ethereum (Without GPU, PSU), Motherboard + Chassis

41K+jhFLFfL. AC51 FNmI0oRL. AC411XlPDXGoL. AC41qrOosvH4L. AC41DX1E0Vk L. AC51RjmmH0QwL. AC31a3ukIFunL. AC51 IzQPtRXL. AC
Price: $555.99
(as of Sep 11, 2022 05:08:30 UTC – Details)

💡Tryout HIVEOS Entirely Free:

buy now

6 GPU slot ETH-HSW2 miner system


Product name: ETH-HSW2

Graphics card spacing: 6 cards, 70mm (2.75in) slot spacing

CPU: Intel 4th generation dual-core notebook U

Memory support type: DDR3 SO-DIMM slot

System hard disk interface: 1*mSATA

Display interface: 1*HDMI

USB interface: 4*USB2.0 interface

Connection line: 8 pure copper 8p power cords

Fans: 4 fans 12038 6000RPM

Operating system: Windows 10 64 bit

PCIE slot number: 6*PCIEX16 slot

Chassis size: 58*40*18cm (22.83in*15.75in*7.09in)

Package Included:
1 * Mining machine motherboard
1 * CPU motherboard (including CPU cooler)
4 * Cooling fan
1 * Chassis

1. This product does not contain GPU, memory, power supply, and hard disk. You need to buy and install it yourself.
2. Our motherboard only supports single power supply. If you want to use multiple power supplies, you need to short-circuit them and use a professional mining machine power supply.
3. When the GPU is used for overclocking, the power consumption will be much higher. It is recommended to use it below the rated power of the power supply, otherwise it is easy to burn the motherboard and power supply! For example, in the case of 3090 overclocking, the power consumption of a single card is about 350W, so we recommend that you use 4 cards. 3080 overclocking is also 4 cards. 3070 and 3060 can hold 6 cards and run stably.
[Chassis+Motherboard] Designed for cryptocurrency mining. It has 6 GPU slots (but no GPU), DDR3 memory interface, 1 VGA port, Ethereum mining machine, enough for daily mining. Note: Please make sure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating
[6 GPU interfaces] The mining machine system comes with 6 GPU interfaces, and the GPU interface spacing is about 70mm (2.75in). The motherboard can install 6 GPUs at the same time. The actual work done for you is lasting and rewarding.This rig can dig special coins and firewood coins (please read the precautions in the product description carefully before buying!)
[Upgrade material] The GPU frame shell of our mining machine is made of high-quality steel, which is durable and reusable. Two large CPU cooling plates provide super cooling. 4 cooling fans, fast heat dissipation, to ensure your normal use. It can fully protect your GPU and electronic equipment from damage and save your usage cost. Excellent equipment design improves GPU performance. Higher mining efficiency
[4 fans support] Comes with 4 cooling fans, you can control the fan speed through the equipped controller, provide excellent heat dissipation capacity for the chassis, assist GPU heat dissipation, and keep the graphics card running at high performance
[Safety and low power consumption] Low power consumption, reduce heat generation, energy saving, and safe use. It is designed for the cryptocurrency Ethereum. This is a necessary condition for mining any other cryptocurrency. Note: The hard disk does not have a system installed. After downloading from the official website of the system, there is a corresponding installation and usage tutorial. Compatible with Win10/OS, but you need to install the system yourself

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *